FSC-BT9101AI
FSC-BT9101AI is a dual-mode Bluetooth 5.3 low-power long-distance high-speed data transmission module that supports SPP, HID, GATT and ATT protocols. The module has a variety of hardware interfaces, including UART, SPI, I2C, AIO and PIO, and integrates an MCU, RF controller and on-board antenna. It has built-in easy-to-use firmware by default. Developers can quickly integrate Bluetooth functions through simple serial port AT commands, thus shortening the product design and development cycle.
Development board
fsc-db004-pin 
- High cost performance Bluetooth® v5.3 wireless Bluetooth dual-mode SoC module with built-in complete Bluetooth system.
-
-
- high speed transmission:
- SPP maximum rate 80 kB/s
- GATT maximum rate 65 kB/s
-
-
- RF radio frequency specifications:
- Bluetooth v5.3 dual-mode RF baseband
- backwards compatible 4.2/4.0/3.0/2.1/2.0/1.2/1.1 specification
- TX maximum transmit power +2dBm
- RX maximum sensitivity-97dBm
- Bluetooth protocol support: SPP, HID, GATT, TO, GAP etc.
-
-
- General specifications:
- 13mm × 26.9mm thirty-six-pin stamp package
- The onboard antenna is used by default and supports the installation of external Feitong antenna or other antennas.
- UART host programming interface (the default baud rate is 115200, the setting range is 1200bps~921600bps)
- I²C/SPI interface
- RoHS compliant
- Support master-slave integration
- Support UART/OTA over-the-air upgrade
- Support customized development
- General specifications:
-
- RF radio frequency specifications:
-
- high speed transmission:
-
| Bluetooth | |
|---|---|
| Bluetooth version | Bluetooth 5.3 (BR/EDR & THE) |
| Transmit power | +2dBm (maximum value) |
| Receive sensitivity | -90 dBm（2Mbps EDR）
-97 dBm (BLE) |
| protocol | GATT, SPP, HID, and other customized protocols |
| antenna | The onboard antenna is used by default and supports the installation of external Feitong antenna or other antennas. |
| General specifications | |
|---|---|
| wafer | High performance SOC chip |
| size (mm) | 13 × 26.9 × 2.2 |
| interface | UART, I2C, SPI |
| working temperature | -40°C ~ +85°C |
| storage temperature | -40°C ~ +85°C |
| Supply voltage | VDD: 3.3V |
access control
Automotive electronics
smart home
Data transfer
Wireless Internet of Things