FSC-BT618 TI CC2642R BLE 5.2 Low power consumption bluetooth module
FSC-BT618 是一款專為 BLE 5.2 藍芽低功耗應用設計的無線模組，整合了 TI CC2642R 芯片，內建 ARM® Cortex®-M4F 微控制器。其極低的工作電流與低功耗模式下的電流消耗，可提供卓越的電池壽命，適用於小型按鍵型電池及對功耗敏感的產品應用。FSC-BT618 配備獨特的超低功耗感測器控制器，用於連接外部感測器，在系統其他部分處於休眠模式時，可自主收集類比與數位資料。該模組支援先進的 BLE 5.x 功能：高速 LE 2Mbit 物理層、遠距離 LE 編碼物理層、255 帘廣播擴展、GAP、ATT/GTT、SMP 及 L2CAP 檔案。此模組預設內建易於使用的韌體，開發者可透過簡單的串列 AT 命令快速整合藍芽功能。
Development board
fsc-db004-pin 
-
-
-
- TI CC2642R 低功耗BLE 5.2模組，內建ARM® Cortex®-M4F微控制器，支援執行藍芽BLE多協議軟體。
-
- 先進的 BLE 5.x 特性:
- LE 2Mbit PHY高速傳輸
- LE編碼PHY遠距離通訊
- 255位元組廣播擴展
- RF radio frequency specifications:
- 2.4-GHz Bluetooth 5.2 Low Energy (BLE) 收發器，且支援更早的 BLE 設定檔版本
- 102 dB BLE鏈路預算
- -95dBm（最小接收靈敏度，1Mbps PHY）
- -105dBm（最小接收靈敏度，125Kbps LE Coded PHY）
- Class 1.5 support(最大發射功率 +5 dBm)
- General characteristics:
- 13mm x 26.9mm 36腳郵票封裝
- 支援BLE主從一體 (central and peripheral)
- Support OTA upgrade
- 藍芽協議支援: TO, GATT, HOGP, 及其他BLE協議
- UART串口波特率: 1200 bps ~ 921600 bps (default: 115200 bps)
- UART, I2C, SPI, PWM, 12-bit ADC (200ks/S) 介面支援
- 支援8個電容感應按鈕
- 整合式溫度感測器
- 先進的 BLE 5.x 特性:
-
-
| wafer | TI CC2642R |
| Bluetooth version | Bluetooth v5.2 Low Energy (BLE) |
| Transmit power | +5 dBm (maximum value) |
| Receive sensitivity | -105 dBm (最小值) |
| protocol | BLE: TO, GATT, GAP, 以及其他BLE協議 |
| GPIO数 | 18 |
| interface | UART, I2C, SPI, ADC, DAC, PWM |
| antenna | The onboard antenna is used by default and supports the installation of external Feitong antenna or other antennas. |
| size (mm) | 13 × 26.9 × 2.2 |
| working temperature | -40°C ~ +85°C |
| storage temperature | -40°C ~ +85°C |
| Supply voltage | VDD: 1.8V ~ 3.8V |
industrial automation
智慧醫療
smart home
Wearable device
Wireless Internet of Things
Documentation